In order for the bearing to have a long life without problems, the lubrication and maintenance should be performed well. The bearing races are lubricated during the first assembly. The bearings must be lubricated immediately after they are first assembled to the machine or wherever they are used. Under ordinary conditions, lubrication should be materialized in accordance with the Table 3. If the bearing races are required to operate outside the specified temperature and conditions, it is required to consult our technical service.

Lubrication must be repeated 20 hours after the first operation and thereafter once in every 50 hours periodically.

If the machine has not been operating for long time, lubrication must be done before and after operation. The bolts should be screwed at the end of the first 100 hours and once in every 3 months. Attention should be paid that no abrasive materials such as sand, water etc. enter the bearing races.